Skip to main content

Dura3G artificial pitch

Dura3G overhead
Dura3G profile

    Why Dura3G?

    Dura3G

    3G pitch installation

    A Dura3G pitch requires less maintenance than natural grass and with no watering, mowing or weed removal, the 3G turf offers some environmental advantages.

    Developed for a variety of sports, Dura3G is hard-wearing, durable and resilient, allowing for high levels of use and activity, whilst retaining its look and performance.

    Dura3G pitches are specifically designed to meet a range of requirements from low, medium and high levels of use

    It provides a consistent and quality playing surface with excellent playing characteristics, including ball bounce and ball roll.

    Need guidance and assistance?

    Call 01825 729259 or email us

     

    Dura3G specification

    Surface description3G
    Pile height50mm (40mm and 60mm available)
    Stock item or special orderSpecial order
    Minimum bespoke pitch size800sqm. Possibly smaller if production schedule allows. Please check with us.
    Line colours availableWhite
    Lead timeBespoke and special order pitch lead time is around 3 to 4 weeks
    Suitable footwearMoulded circular studs or flat soles
    Backing materialLatex
    Infill requirement15kgs/sqm rounded silica sand 0.2mm-0.75mm and 13kgs/sqm SBR 0.8mm-2mm
    Play pad requirementRecommended 10mm
    Suitable activitiesMulti sports
    AccreditationNA
    Warranty5 years
    Need guidance and assistance?

    Call us on 01825 729259 or email us

    Dura3G installations

    3G pitch installation London
    40mm
    3G pitch installation
    50mm
    3G pitch installation London
    60mm
    Need guidance and assistance?
    Call us on 01825 729259 or email us

    Installation guidance

    Existing suitable base - tarmac, concrete or base already laid for current pitch
    Step 1Make good any defects in surface - holes, cracks, dips 
    Step 2

    Ensure suitable permeability. It’s not recommended to install grass on an existing surface which is not porous or will not allow drainage. A sloped surface will be ok, allow for water to escape from the lowest edge. A level surface can be made permeable by drilling holes into it. 

    Step 3A 10mm play pad is recommended
    Step 4A sand and rubber crum infill is required for 3G surfaces - check product specification tab for infill rate
    Step 5Ensure that joining tape and glue products are suitable for the project
    Step 6If using white /coloured line material install as per instructions.
    Step 7Discuss the above steps with your contractor

     

    Small pitches - base required
    Step 1Depending on soil type, remove 100mm to 200mm of soil
    Step 2If soil has poor drainage install a herringbone drainage system which feeds into a soakaway. If the soil is well draining this requirement is not necessary
    Step 3Install suitable edging to the area to retain sub base materials
    Step 4Install free draining, compacted, stable base using suitable aggregate materials
    Step 5The top surface may be compacted sharp sand, granite dust, or pourous tarmacadam
    Step 6A 10mm play pad is recommended for 2G surfaces
    Step 7A sand and rubber crum infill is required for 3G surfaces - check product specification tab for infill rate
    Step 8Ensure that the joining tape and glue products are suitable for the project
    Step 9If using white /coloured line material install as per instructions.
    Step 10Discuss the above steps with your contractor

     

    Large/Full sized pitch - base required

    These projects require further consideration, planning, and discussion. Please contact us.

    Need guidance and assistance?

    Call us on 01825 729259 or email us

    Care and maintenance

    Dura3G

    This care and maintenance info sets out basic requirements for your new artificial grass sports or games surface. It is important to ensure the guidelines are followed, so to ensure you get the most enjoyment from the surface, that the lifetime and performance of the surface is maximised. Synthetic turf systems are not maintenance free, they are low maintenance.

    Step 1Maintenance of the artificial surface is crucial to ensure maximum performance and enjoyment of the multi-use pitch. During the course of normal use the infill can be dispersed and the grass blades flattened so maintenance is required to redistribute the infill and lift the pile. A drag brush/compact tractor unit is required for this work
    Step 2Regular removal of leaves and litter will help to ensure that the surface and infill is not contaminated, leading to issues with drainage and performance
    Step 3Quarterly treatment for moss and weeds is recommended, using water based products. Once the treament has been applied all dead matter should be removed to avoid issues with drainage and performance
    Step 4Inspect the surface for damage and pay particular attention for any signs of roll joins opening up. Early remedial work is important where necessary
    Step 5Where paint has been applied to create lines, reapply as required.

     

    Need guidance or assitance? 

    Call 01825 729259 or email us


    Products for Dura3G artificial grass installations

    Perfect Wall plant panels for indoor and outdoor use