Skip to main content

DuraPlay 4G artificial pitch

Duraplay 4G pitch
Duraplay 24

    Why DuraPlay 4G?

    DuraPlay 4G

    Duraplay installation

    Duraplay 24mm is an all weather 4G multi sports surface which is suited for almost any sports activity. It is made with a combination of curled polyethylene monofilament and straight polyethylene fibrillated yarns. This all gives a supportive layer which is good for softness and coverage.

    The Duraplay 24 is a very high quality surface which is specifically manufactured for performance and longevity. It also comes with a 10 year warranty for peace of mind.

    • Authentic appearance
    • Ideal for Sports & High Traffic Areas
    • Less Skin Abrasion
    • Good ball roll and bounce
    • Good visibility of the lines
    • Easy to install and remove
    Need guidance and assistance?

    Call 01825 729259 or email us

     

    DuraPlay specification

    Surface description4G
    Pile height24mm (32mm available)
    Stock item or special orderBoth - stock rolls are usually 4m x 25m
    Minimum bespoke pitch size800sqm
    Line colours availableWhite, yellow, clay red, and blue
    Lead timeIf in stock, lead time is around 2 to 3 weeks from order and payment subject to delivery location and delivery schedules. Special order pitch lead time is around 4 to 6 weeks
    Suitable foorwearMoulded circular studs or flat soles
    Backing materialLatex
    Infill requirementOptional 5kgs/sqm
    Play pad requirementRecommended 10mm Play Pad
    Suitable activitiesFootball, netball, basketball, tag rugby, multi sports
    AccreditationTBC
    Warranty7 year based on correct use and maintenance
    Need guidance and assistance?

    Call us on 01825 729259 or email us

    DuraPlay installations

    Duraplay Installation
    Duraplay 24mm
    Duraplay Installation
    Duraplay 24mm
    Duraplay Installation
    Duraplay 24mm
    Need guidance and assistance?
    Call us on 01825 729259 or email us

    Installation guidance

    Existing suitable base - tarmac, concrete or base already laid for current pitch
    Step 1Make good any defects in surface - holes, cracks, dips 
    Step 2

    Ensure suitable permeability. It’s not recommended to install grass on an existing surface which is not porous or will not allow drainage. A sloped surface will be ok, allow for water to escape from the lowest edge. A level surface can be made permeable by drilling holes into it. 

    Step 3A 10mm play pad is recommended
    Step 4A sand dressing is recommended for 4G surfaces - check product specification tab for infill rate
    Step 5Ensure that joining tape and glue products are suitable for the project
    Step 6If using white /coloured line material install as per instructions. If using white or coloured line marking paint using a product suitable for artificial grass
    Step 7Discuss the above steps with your contractor

     

    Small pitches - base required
    Step 1Depending on soil type, remove 100mm to 200mm of soil
    Step 2If soil has poor drainage install a herringbone drainage system which feeds into a soakaway. If the soil is well draining this requirement is not necessary
    Step 3Install suitable edging to the area to retain sub base materials
    Step 4Install free draining, compacted, stable base using suitable aggregate materials
    Step 5The top surface may be compacted sharp sand, granite dust, or pourous tarmacadam
    Step 6A 10mm play pad is recommended
    Step 7A sand dressing is recommended for 4G surfaces - check product specification tab for infill rate
    Step 8Ensure that the joining tape and glue products are suitable for the project
    Step 9If using white /coloured line material install as per instructions. If using white or coloured line marking paint using a product suitable for artificial grass
    Step 10Discuss the above steps with your contractor

     

    Large/Full sized pitch - base required

    These projects require further consideration, planning, and discussion. Please contact us.

    Need guidance and assistance?

    Call us on 01825 729259 or email us

    Care and maintenance

    Duraplay

    This care and maintenance info sets out basic requirements for your new artificial grass sports or games surface. It is important to ensure the guidelines are followed, so to ensure you get the most enjoyment from the surface, that the lifetime and performance of the surface is maximised. Synthetic turf systems are not maintenance free, they are low maintenance.

    Step 1Maintenance of the artificial surface is crucial to ensure maximum performance and enjoyment of the multi-use pitch. During the course of normal use the infill can be dispersed and the grass blades flattened so maintenance is required to redistribute the infill and lift the pile. A drag brush/compact tractor unit is required for this work
    Step 2Regular removal of leaves and litter will help to ensure that the surface and infill is not contaminated, leading to issues with drainage and performance
    Step 3Quarterly treatment for moss and weeds is recommended, using water based products. Once the treament has been applied all dead matter should be removed to avoid issues with drainage and performance
    Step 4Inspect the surface for damage and pay particular attention for any signs of roll joins opening up. Early remedial work is important where necessary
    Step 5Where paint has been applied to create lines, reapply as required.

     

    Need guidance or assitance? 

    Call 01825 729259 or email us


    Products for DuraPlay artificial grass installations

    Perfect Wall plant panels for indoor and outdoor use